• Romkslrqusz@lemmy.zip
    link
    fedilink
    English
    arrow-up
    13
    ·
    2 months ago

    PSA, populating all four DIMMs on a modern AMD platform has the potential to reduce achievable stable memory frequency

      • BradleyUffner@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        2 months ago

        Basically the memory controller has to work double duty to run 4 sticks instead of 2. Not all memory controllers are fast enough to handle all 4 slots at the full speed. It’s going to depend on your specific motherboard though, it’s not a global rule that 4 sticks is always slower than 2.

      • Romkslrqusz@lemmy.zip
        link
        fedilink
        English
        arrow-up
        3
        ·
        2 months ago

        I couldn’t accurately describe the complete technical reason why, but if you have a look at the specs for an AMD CPU like the 9800X3D (https://www.amd.com/en/products/processors/desktops/ryzen/9000-series/amd-ryzen-7-9800x3d.html):

        Max Memory Speed

        2x1R DDR5-5600

        2x2R DDR5-5600

        4x1R DDR5-3600

        4x2R DDR5-3600

        Most samples will actually support frequencies in excess of that, what is published is what is guaranteed to work among non-defective chips.

        It has to do with the overall bandwidth of the CPU’s Integrated Memory Controller.

        Back before AMD published this info, I had diagnosed a few cases where support for a given frequency changed based on what I thought was capacity (e.g 24GB vs 32GB) but may have actually been related to module count.

    • halcyoncmdr@piefed.social
      link
      fedilink
      English
      arrow-up
      3
      ·
      2 months ago

      Also a reminder that frequency is not everything, timings are nearly as important. A lower frequency with tighter timings can achieve better performance.